Saturday , November 25th 2017
    Metals....not yucky plastics

E52100 Alloy Steel Round Rod, Unpolished (Mill) Finish, Annealed, AMS S-7420, 1/2″ Diameter, 72″ Length

Product Features:

    The E52100 alloy steel round rod has been annealed, has an unpolished (mill) surface, meets American Society for Testing and Materials International AMS S-7420 specifications, and has a standard tolerance. The E52100 alloy steel grade has a high carbon and chromium content for high strength and wear resistance. This…
24.23  

Product Description

The E52100 alloy steel round rod has been annealed, has an unpolished (mill) surface, meets American Society for Testing and Materials International AMS S-7420 specifications, and has a standard tolerance. The E52100 alloy steel grade has a high carbon and chromium content for high strength and wear resistance. This material can be heat treated for higher hardness. The rod has been annealed, a method of heating and cooling metal to modify its properties, such as increasing its formability and toughness or decreasing its strength, after it has been shaped.

Steel is an iron alloy with carbon and other elements that modify the steel to achieve specific properties. In general, steels with higher carbon content have greater strength, hardness, and wear resistance, while those with lower carbon content have more formability, weldability, and toughness. Carbon steels, which include most AISI-SAE grades in the 1000 range, are classified by their level of carbon content as low (below 0.3%), medium (0.3% to 0.6%) and high (0.6% and above). Alloy steels, which include AISI-SAE grades in the 1300 and 4000 ranges and above, incorporate elements such as chromium, molybdenum, and nickel to modify properties like machinability and corrosion resistance. Tool steels, which include most grades with a letter and number grade designation, have high carbide content for wear resistance, high hardness, and the ability to hold a cutting edge. Some tool steels are designed to resist deformation when used in elevated temperatures.

Tensile strength, used to indicate a material’s overall strength, is the peak stress it can withstand before it breaks. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Toughness describes the material’s ability to absorb energy before breaking, while hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. Formability indicates how easily the material can be permanently shaped. Machinability describes how easily it can be cut, shaped, finished, or otherwise machined, while weldability characterizes the ability to be welded.

Product Features

  • E52100 alloy steel provides high strength and wear resistance
  • Meets AMS S-7420 specifications
  • Annealed after shaping to modify the metal’s properties
  • Unpolished (mill) surface has no finish
  • Standard tolerance

0 Comments

Leave A Reply





Saturday 25th of November 2017 04:02:07 AM